Model DT333-0700
4-Wire mV/TC Dual Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 29 -
http://www.acromag.com
- 29 -
https://www.acromag.com
USB OTG Cable
USB OTG Cable
–
Order 5028-565
•
USB OTG Cable 5028-565
This is a 6-inch, USB On-The-Go cable for connection between the USB A-mini B
Cable and a mobile phone or tablet. It is required to use the Acromag Agility
™
Config Tool App.
Note that the Acromag Agility
™ Config Tool is available free of charge, online at
the Google Play store.
DIN Rail Bus Connector Kit
Bus Connector Kit for DIN Rail Connection to Power
–
Order TTBUS-KIT
This kit contains one each of the following terminals
•
DIN Rail Bus Connector 1005-063 for 17.5mm TT/SP Modules.
•
Left Side terminal block, female connector 1005-220.
•
Right Side terminal block, male connector 1005-221.
•
Two End Stops for 35 mm DIN Rails 1027-222 (not shown).
SP splitters and DT transmitters are shipped with their bus port plugged. Remove
this plug and insert DIN Rail Bus Connector 1005-063, which allows multiple units
to snap together. Then add a left or right-side terminal block to mate to the bus
connector to wire power to the bus. These terminals can be used to optionally (or
redundantly) drive power to Series TT/DT/SP modules via the DIN rail bus
connector and allowing modules to neatly and conveniently share a connection to
Power. Two end stops 1027-222, used to secure the terminal block and module for
hazardous location installations.
End Stops
Two End Stops
–
Order 4001-252
•
Two 1027-222 End Stops for 35 mm DIN Rail mounting
For hazardous location installations (Class I, Division 2 or ATEX/IECEx Zone 2), you
can use two end stops (Acromag 1027-222) to help secure modules to 35mm DIN
rail (not shown).
