Model DT333-0700
4-Wire mV/TC Dual Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 19 -
http://www.acromag.com
- 19 -
https://www.acromag.com
Configuration
Note that you should already have power connected to the
transmitter at this point. This model does not utilize USB power and
you will not be able to configure, calibrate, or test the unit without
separate power applied.
After executing the Acromag Configuration software for this model,
the first screen shown at left will appear, if you have not already
connected to your transmitter via USB (note fields are blank under
these conditions).
Connect your PC to the unit via USB, and the unit
’s model
-serial
information will appear in the Device field as shown in the third
screen at left.
If you happen to be connected to more than one unit via a USB hub,
you can use the Device scroll field to select another unit, using its
serial number suffix of the Device Model number to help discern one
unit from another.
Once you have selected a device, click the
[Open]
button to open
communication with the unit.
After clicking [Open], the selected unit’s Model, Serial Number,
Manufacturer, and connection status message will be displayed as
shown in the third screen at left.
TIP:
Always Close a connection with one device before selecting
another device and make sure you have the correct model software
loaded for the model you are configuring.
After you connect USB and “Open” communications with a unit, the
Status field indicates “Device opened successfully”
as shown in the
screen at left.
At this point, you can click the
“
Configuration
”
tab to begin
configuring the unit.
