Model DT333-0700
4-Wire mV/TC Dual Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 3 -
http://www.acromag.com
- 3 -
https://www.acromag.com
All trademarks are the property of their respective owners.
IMPORTANT SAFETY CONSIDERATIONS
You must consider the possible negative effects of power, wiring, component, sensor, or software failure in the design of
any type of control or monitoring system. This is very important where property loss or human life is involved. It is
important that you perform satisfactory overall system design and it is agreed between you and Acromag, that this is your
responsibility.
The information of this manual may change without notice. Acromag makes no warranty of any kind regarding this
material, including, but not limited to, the implied warranties of merchantability and fitness for its intended purpose.
Further, Acromag assumes no responsibility for any errors that may appear in this manual and makes no commitment
to update, or keep current, the information contained in this manual. No part of this manual may be copied or
reproduced in any form without the prior written consent of Acromag, Inc.
This manual is for dual DT333 4-wire transmitters (4-wire refers to having separate isolated power) that
convert two channels of thermocouple or low DC voltage signals to isolated voltage or current output signals.
However, if your application requires dual 2-wire (loop-powered) transmitter instead, please refer to the
similar DT233 model. For DC voltage and current input signals, please refer to other DT33x (4-wire) and DT23x
(2-wire loop-powered) models.
