Model DT333-0700
4-Wire mV/TC Dual Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 15 -
http://www.acromag.com
- 15 -
https://www.acromag.com
Quick Overview
–
Windows...
Calibration (Input, Output, or Temp Ref if Needed)
•
Calibrate an input channel, output channel, or
temperature reference as needed.
This unit has already been factory calibrated. If you
encounter excessive error, you can choose to click the
Calibration tab to display the Calibration control page
shown in the second screen at left.
To calibrate the Input channel, Output channel, or
Temperature Reference of this model, simply select the
channel
click the respective “
Cal
Instructions” button and
follow the on-screen prompts.
Note that only nominal I/O ranges are used for
calibration, not scaled sub-ranges ranges.
Diagnostics (Optional, to Verify Unit Operation)
•
Use this screen to verify communication with the
unit or problems with your input wiring.
•
Click
[Start Polling]
to periodically read your input
channels and validate operation. Click
[Stop Polling]
to stop polling the input channels. The simulated
red lamp to the left of the button flashes slowly
when the software polls the input channels. Stop
polling before selecting another page or sending a
new reconfiguration.
After making Configuration changes, you may use the
Diagnostics - TEST I/O controls to start/stop polling the
input channel(s) to check your input readings (see 3
rd
screen at left).
The communication status of the polling messages is also
indicated and can be helpful to troubleshoot connection
problems.
HELP
–
You can press F1 for Help on a selected or
highlighted field or control. You can also click the [?]
button in the upper-right hand corner of the screen and
then click again to point to a field or control to get a Help
message pertaining to the item you pointed to.
