Page
70
of
125
4.7 Accessories
This screen shows accessories configured in the controller.
New accessories can be added, edited, and deleted using
the buttons at the bottom of the table. The gear icon
navigates to the Accessory Scanning and Setup page.
The Smart Arm Accessory allows an articulated arm with
encoders to be used with the GenIV controller. Fastener
locations can be programmed into the controller so that the
controller will perform specific actions when the tool is
located on a specific fastener.
For more specific instruction contact:
AIMCO Technical
Service Toll Free 1-800-852-1368 or go to http://www.aimco-
global.com/Data/Sites/1/manuals/gen-iv-controller-smart-
arm-manual.pdf.
4.8 Diagnostics
The Diagnostics menu contains all pertinent information
regarding unusual behavior of the system. Detailed
descriptions are given below.
Assignable IO.docx
