82
12.1
Set- up Methods
y
Please click(
) “System>Devices>Serial-In”, then you will see the display below.
y
Port rs232 is used to connect serial devices. Press(
) the “Port Setting” button in order to set up the port. Default
values are Baud rate 2400 bps, Data Bit 5 bit, Stop Bit 1 bit, Parity None.
y
When the setup is done, press enter(
).
y
OSD items are to decide whether to display the information from the serial port connected to the rs232 port on OSD
screen. They have 4 menus as followings:
-
None : does not display anything on the OSD screen.
-
Live : displays incoming information from the serial port in real time on the OSD screen.
-
Playback : displays the saved information on the OSD screen during replay.
-
Both : displays all the information on both Live and Playback mode.
y
When “Use” items of Nos. 1-8 are checked
5
on Serial-In page, it gets the data from the applicable serial device.
y
You can select the name of serial device if you click(
) the keyboard button for Title.
y
You can check
5
the “Auto” item so as to analyze automatically the data out of serial device and create user-friendly
information.
Unless you check “Auto” item, make sure to set up “Start Pattern” and “End Pattern”.
“Discard Pattern”, “Line Delimiter”, “MCPL” are used, independent of “Auto” mode.
(Note)
The above menu is only available on the DVR model with Serial-In function.
