Acer Z5700 Series Service Manual Download Page 18

Page: 18 / 206

Chapter 1

Right View

IMPORTANT:

Your computer’s hardware options, port locations, and indicators may vary from this illustration.

No.

Component

Icon

Description

Headphone jack
(white plug)

Plug powered, analog front speakers, an external amplifier, or
headphones into this jack.

Microphone jack
(pink plug)

Plug a microphone into this jack.

Illumination Toggle
Switch

Memory card
reader

Insert a memory card from a digital camera, MP3 player, PDA,
cellular telephone, or other device into the memory card reader.

Optical Disk Drive

Use this drive to listen to audio CDs, install games and programs,
watch DVDs, and

store large files onto recordable discs (depending on drive type). This
drive may be

a CD, recordable CD, DVD, or recordable DVD.

Summary of Contents for Z5700 Series















































































































































































































Search results

Summary of Contents for Z5700 Series

Reviews:

Acer Z5700 Series, Service Manual, Page: 18 / 206

Search results

Summary of Contents for Z5700 Series

Reviews: