7
X1230S : 54.5” (Diagonal at 1m) image size.
X1235/X1230K : 60” (Diagonal at 2.3m, Wide) image size.
2. Default preset mode “ Dynamic”
3. Full white pattern to check the image.
Let the projector on the desk (don’t move it up/down or left/
right) and just inspect the pattern.
3.0 Mechanical Specification
3.1 Dimensions
264 x 225 x 95 mm (L x W x H)
3.2 Weight
X1130/X1230
/X1235/X1230K
: <2300g
X1230S : <2500g
3.3 Security Slot
Kensington compatible slot 150N break away force
3.5 Lens Cover
Lens Cover
3.6 Feet
Fast adjustable foot in front, Adjustable foot and Fixed foot in
rear. foot Tilt:0-6
∘
,right/left: +2.2
∘
/-0.5
∘
4.0 Packaging
4.1 Outside Dimensions 360 x 180 x 297 mm (L x W x H)
4.2 Weight
X1130/X1230
/X1230K
: < 4000g
X1230S : < 4100g
X1235 : <3800g
5.0 Thermal Specification
Mechanical component temperature at ambience 0~35
℃
5.1 Surface held or
touched for short periods
Metal < 65
°
C; Plastic<85
°
C
Metal
Plastic
5.2 Surface which may
be touched
<65
°
C
<85
°
C
5.3 Exhaust Air
<95
°
C
6.0 Environmental
Operating
0~35
°
C, without condensation
6.1 Temperature
Storage
X1130/X1230/X1230S :
-20~60°C, without
condensation
X1235/X1230K : -30~65°C, without
condensation
Operating
10~90%RH, without condensation
6.2 Humidity
Storage
10~90%RH, without condensation
Typical
X1130/X1230/X1230S :
Normal mode: 32dBA @ 25°C
Eco mode: 27dBA @ 25°C
X1235 :
Normal mode: 33dBA @ 25°C
Eco mode: 28dBA @ 25°C
X1230K :
Normal mode: 34dBA @ 25°C
Eco mode: 29dBA @ 25°C
6.3 Audible Noise Level
Maximum
X1130/X1230/X1230S :
Normal mode: 34dBA @ 25°C
Eco mode: 29dBA @ 25°C
X1235 :
Normal mode: 35dBA @ 25°C
Eco mode: 30dBA @ 25°C
X1230K :
Normal mode: 36dBA @ 25°C
Eco mode: 31dBA @ 25°C
Summary of Contents for X1130 Series
