88
Standard Timing ID 1: 1152 x 864 @70Hz
Standard Timing ID 2: 1280 x 1024 @60Hz
Standard Timing ID 3: 1280 x 960 @60Hz
Standard Timing ID 4: 1400 x 1050 @60Hz
Standard Timing ID 5: 1600 x 1200 @60Hz
Standard Timing ID 6: 1280 x 800 @60Hz
Standard Timing ID 7: 1440 x 900 @60Hz
Standard Timing ID 8: 1680 x 1050 @60Hz
______________________________________________________________________
(36H-47H) Detailed Timing / Descriptor Block 1:
800x600 Pixel Clock: 40.00 MHz
______________________________________________________________________
Horizontal Image Size: 0 mm Vertical Image Size: 0 mm
Refreshed Mode: Non-Interlaced Normal Display - No Stereo
Horizontal:
Active Count: 800 pixels Blanking Count: 256 pixels
Sync Offset: 40 pixels Sync Pulse Width: 128 pixels
Border: 0 pixels Frequency: 37.88 kHz
Vertical:
Active Count: 600 lines Blanking Count: 28 lines
Sync Offset: 1 lines Sync Pulse Width: 4 lines
Border: 0 lines Frequency: 60.32 Hz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (-)
______________________________________________________________________
(48H-59H) Detailed Timing / Descriptor Block 2:
Monitor Range Limits:
Min Vertical Freq - 48 Hz
Max Vertical Freq - 86 Hz
Min Horiz. Freq - 31 kHz
Max Horiz. Freq - 92 kHz
Pixel Clock - 170 MHz
GTF - Not Used
______________________________________________________________________
(5AH-6BH) Detailed Timing / Descriptor Block 3:
Monitor Name:
X1130
______________________________________________________________________
(6CH-7DH) Detailed Timing / Descriptor Block 4:
Monitor Serial Number:
J90050018401
(7EH) Block No: No Extension EDID Block(s)
CheckSum OK
Summary of Contents for X1130 Series
