
81
Index of Symptom-to-FRU Error Message
Error Message List
No beep Error Messages
FRU/Action in Sequence
No beep, power-on indicator turns off and LCD
is blank.
Power source (battery pack and power adapter). See “Power
System Check” on page 77.
Ensure every connector is connected tightly and correctly.
Reconnect the DIMM.
LED board.
Main Board.
No beep, power-on indicator turns on and LCD
is blank.
Power source (battery pack and power adapter). See “Power
System Check” on page 77.
Reconnect the LCD connector
Hard disk drive
LCD inverter I
LCD cabl
LCD Inverter
LCD
Main Board
No beep, power-on indicator turns on and LCD
is blank. But you can see POST on an
external CRT.
Reconnect the LCD connectors.
LCD inverter I
LCD cable
LCD inverter
LCD
Main Board
No beep, power-on indicator turns on and a
blinking cursor shown on LCD during POST.
Ensure every connector is connected tightly and correctly.
Main Board
No beep during POST but system runs
correctly.
Speake
Main Board
Summary of Contents for TravelMate 610 series
