![background image](http://html.mh-extra.com/html/acer/aspire-3300/aspire-3300_service-manual_5852075.webp)
Chapter 4
67
Error Message
Possible Cause
Corrective Action
IDE Secondary Channel
Master Drive Error
IDE Secondary Channel
Slave Drive Error
drive(s) configuration. If it
still fails, replace the hard
disk drive(s) or the system
board.
Hard Disk Drive(s) Write
Protected
-Hard disk(s) is set to
Write
Protected
in BIOS Setup.
-Enter BIOS Setup and
restore the setting to
Normal.
CPU Clock Mismatch
-CPU type or CPU
internal/external frequency is
changed.
-Enter BIOS Setup and
this warning message will
be cleared automatically.
Real Time Clock Error
-The system detects a real
time clock error.
-Check the RTC circuit or
replace the system board.
CMOS Battery Bad
-CMOS battery power lost.
-Replace the on-board
CMOS battery.
CMOS Checksum Error
-CMOS checksum is not
correct.
-Run Setup again and re-
configure the system.
I/O Parity Error
-The system detects an I/O
parity error.
-Replace the system
board.
Insert system diskette and
press Enter key to reboot
-The system can not find
any boot device.
-Check hard disk(s)
configuration and reboot or
insert the bootable diskette
and press the Enter key to
boot up the system.
I/O Resource Conflict(s)
-The system I/O resources
conflict with the resources
required by the PCI
device(s).
-Try to reset resource
assignments.
Memory Resource
Conflict(s)
-The system memory
resources conflict with the
resources required by the
PCI device(s).
-Try to reset resource
assignments.
IRQ Setting Error
-Incorrect IRQ setting for the
PCI device.
-Run BIOS Setup to re-
configure the system.
Expansion ROM Allocation
Failed
-The system failed to
allocate I/O expansion ROM
for PCI device(s).
-Change the I/O
expansion ROM address.
Onboard Serial Port IRQ
Conflict(s)
-The IRQ allocated for on-
board serial port conflicts
with another device.
-Enter BIOS Setup to
change the on-board serial
port IRQ assignment or
disable it.
Onboard Parallel Port IRQ
Conflict(s)
-The IRQ allocated for on-
board parallel port conflicts
with another device.
-Enter BIOS Setup to
change the on-board
parallel port IRQ
assignment or disable it.
Summary of Contents for Aspire 3300
