32
System Utilities
This parameter appears only when you are in the Advanced Level.
DMA Transfer Mode
The Ultra DMA and Multi-DMA modes enhance hard disk performance by
increasing the transfer rate. However, besides enabling these features in the
BIOS Setup, both the Ultra DMA and Multi-DMA modes require the DMA driver
to be loaded. By setting this parameter to
Auto
, BIOS automatically sets the
appropriate DMA mode for your hard disk.
Onboard Peripherals
The Onboard Peripherals menu allows you to configure the on-board devices.
Selecting this option from the main menu displays the following screen:
Onboard Peripherals
Page 1/1
Serial Port .................... [Enabled ]
Base Address ................... [2F8h]
IRQ ............................ [ 3 ]
Parallel Port .................. [Enabled ]
Base Address ................... [378h]
IRQ ............................ [ 7 ]
Operation Mode ................. [Bi-directional]
ECP DMA Channel............... [ - ]
•
*Onboard Device Settings
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
NOTE *: Can only be seen when press
V
.
Serial Port
This parameter allows you to enable or disable the serial port.
Base Address
This function lets you set a logical base address for the serial port. The options
are:
❑
2F8h
❑
3E8h
❑
2E8h
Summary of Contents for Aspire 3300
