34
System Utilities
ECP DMA Channel
This item becomes active only if you select
Extended Capabilities
Port (ECP)
as the operation mode. It allows you to assign DMA channel 1 or
DMA channel 3 for the ECP parallel port function (as required in Windows 95).
Onboard Device Settings
The Onboard Device Settings menu allows you to configure the device
controllers available on-board. Selecting this option from the Onboard
Peripherals menu displays the following screen:
Onboard Device Settings
Page 1/1
*Floppy Disk Controller [Enabled ]
*IDE Controller [Both/Primary/Disabled]
*Onboard Audio Chip [Enabled ]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
NOTE *: Can only be seen when press
V
.
Floppy Disk Controller
This parameter lets you enable or disable the on-board floppy disk controller.
IDE Controller
Set this parameter to
Primary
to enable only the primary IDE channel;
Both
to enable both primary and secondary IDE channels; or
Disabled
to disable
the on-board IDE controllers.
Onboard Audio Chip
This parameter lets you enable or disable the on-board audio controller. If you
installed an audio card into your system, you must disable this parameter for the
card to work properly.
Summary of Contents for Aspire 3300
