Chapter 2
37
Boot Options
This option allows you to specify your preferred settings for boot-up.
The following screen appears if you select Boot Options from the main menu:
Boot Options
Boot Sequence
1st [IDE CD-ROM]
2nd [Floppy Disk]
3rd [Hard Disk]
*First Hard Disk Drive............ [IDE]
*Primary Display Adapter.......... [Auto]
*Fast Boot ....................... [Auto]
*Silent Boot ..................... [Disabled ]
*Num Lock After Boot ............. [Enabled ]
*Memory Test ..................... [Disabled]
*Configuration Table ............. [Disabled]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
NOTE *: Can only be seen when press
V
.
Boot Sequence
This parameter allows you to specify the boot search sequence. To change the
order of devices, simply press
]
or
[
.
First Hard Disk Drive
This parameter specifies whether the BIOS utility will boot from an IDE hard disk
drive or a SCSI hard disk drive. The system will automatically boot from an IDE
hard disk if your system does not have a SCSI hard disk drive. The default
setting is
IDE
.
Primary Display Adapter
Setting this parameter to
Onboard
enables the on-board video controller.
Normally, the on-board video controller is considered as the primary display
adapter. If you installed a video card into your system, set this parameter to
Auto
. BIOS will automatically disable the on-board video controller and
consider the video card as the primary display adapter.
Summary of Contents for Aspire 3300
