AXS
–
Ramp Manual
AXS FL RAMP Manual rev 1
28
When fixing the bolts to the
platform check that the T-nuts are
at 90 degrees to the platform so
they have a firm grip
First fit the bracket at the first or
upper platform
Position is 5- 10 mm from the edge.
Standard is 7 mm
5 mm for less force 10 mm for more
force opening the two platforms
from each other, tighten to 30 Nm
For the 280 models the 2
nd
bracket should be placed as
shown right.
For the models of the 250 series,
the bracket should be placed as
shown left.
The drawing on the right shows
the situation for an heavy duty
ramp and gas spring.
