AXS
–
Ramp Manual
AXS FL RAMP Manual rev 1
21
Place the hook at the slit in the
first (inner) platform using the M8
bolts and T Nuts.
Check the T Nuts after fitting.
They must be under 90 deg with
the profile
Left or right version mirrored
The hook should be aligned with
the center of the lock roll
(approximately)
Place the ramp and the turning device in the vehicle
and fix using the M10 wire struts. If the holes are
going through the chassis, longer struts may be
needed. These struts can be purchased from a local
supplier.
Use the U shape counter brackets under the vehicle.
Fix the top bracket to the wall
with the two M8 bolts at the rivet
nuts that already have been put
in place.
Fix all bolts firmly
Left or right version mirrored
