AXS
–
Ramp Manual
AXS FL RAMP Manual rev 1
17
Before using the ramp: The ramp should always be tested after installation.
Follow the following instructions
checked
MOUNTING
–
Check that all bolts on the
ramp are in place and tightened. Check that
the MAX load stickers are on the ramp
MOUNTING
–
Unfold the ramp and load it
with the max load as indicated at the ramp
or approx 4-5 people. Check that the fixing &
fitting of the ramp is strong enough for this
weight.
OPERATION
–
Move the ramp in and out to
check that all moving parts are running
freely.
Check that the ramp closes properly into the
auto lock
The black nylon roll is eccentrically and can
be adjusted if the ramp lock is to loose.
See
8.2
A loose lock will give a rattling noise.
If this small test procedure is followed with success the ramp is ready to be used. If one of the steps is
failed please resolve the problem before putting the ramp in to service use.
