AXS
–
Ramp Manual
AXS FL RAMP Manual rev 1
26
In case of signs of wear remove the
entire ball joint using a spanner size
13 and 14
Unfold the ramp
Slide the bracket as far as possible
up and tighten the M8 bolts firmly
again using a 5mm Allan key.
Remove the pre-tension rings, close
the ramp and you are ready.
Put the new gas spring in place.
Do not remove the pre- tension
rings before the gas spring is
installed.
Don’t forget to place the lock spring
back at the ball joint. Or tightening the
nuts.
