DGA-6000 ULTRA-HD VIDEO GENERATOR / ANALYZER USER MANUAL
22
Analyzer InfoPanes
(Pro Engineering Option only)
APL InfoPane
Heading -
Signal Levels
Modes
– Frame, Area
Displayed Data –
Measures
Y,Cb,Cr or G,B,R (8/10/12-bit) min/max values in frame or Area rectangle,
and frame APL% (average picture level). Peak reading.
Y:
Min & Max values, plus live bar graph
Cb:
Min & Max values, plus live bar graph
Cr:
Min & Max values, plus live bar graph
or
G:
Min & Max values, plus live bar graph
B:
Min & Max values, plus live bar graph
R:
Min & Max values, plus live bar graph
APL:
% value, live bar graph
Live Bar graphs
- 0, 16 (black), 128, 235 (100%), 255(109%) tic marks for each bar
Cursors
– Area mode only, Set Area rectangle size
L:
– Left edge, use Left/Right keys
T:
– Top edge, use Up/Down keys
R:
– Right edge, use Left/Right keys
B:
– Bottom edge, use Up/Down keys
Press Cursor key to select L:T: edges, R:B: edges, L:T:R:B: rectangle movement
Timing InfoPane
Heading -
Timing Info
Modes
– None.
Displayed Data -
Video Format (i.e. 2160p24), Pixel Frequency (MHz), TMDS Frequency (MHz), Frame
Rate (Hz) and the following: (allow 5 minutes after turn-on for Frequency measurements to stabilize)
H
– Active pixels per line
Ht
– Total pixels per line
Hf
– Front porch pixels per line
Hs
– Hsync pixels per line
Hb
– Back porch pixels per line
V1
– Active lines per frame or interlaced field 1
V1t
–Total lines per frame or interlaced field 1
V1f
– Front porch lines per frame or interlaced field 1
V1s
– Vertical sync lines per frame or interlaced field 1
V1b
– Back porch lines per frame or interlaced field 1
V2
– Active lines per field 2 (interlaced only)
V2t
–Total lines per field 2 (interlaced only)
V2f
– Front porch lines per field 2 (interlaced only)
V2s
– Vertical sync lines per field 2 (interlaced only)
V2b
– Back porch lines per field 2 (interlaced only)
