DGA-6000 ULTRA-HD VIDEO GENERATOR / ANALYZER USER MANUAL
5
Front Panel Controls
LED Indicators
Each time power is applied to the DGA-6000 the PLUGE, Gray Scale, and Gray Field LEDs will
illuminate in sequence for about 15 seconds as the Generator and Analyzer functions are initialized.
The inactive Format LEDs blink once when any valid IR remote control command is received. Any
slowly blinking LED indicates that a special feature mode is active (e.g. Slow Edges).
1 Output Selector
Press and release the Output button to select the type of digital video output produced by the DGA-
6000. Press and release repeatedly to advance directly and more rapidly to the desired Output type.
2
Output Indicator LEDs
YCbCr 444 & YCbCr 422 – YCbCr 4:2:0 signals are selected. *
YCbCr 444 – YCbCr 4:4:4 signals are selected. *
RGB Video – RGB-Video signals are selected. *
YCbCr 422 – YCbCr 4:2:2 signals are selected. *
RGB PC – RGB-PC signals are selected. **
* Y,R,G,B 64-940 (10-bit) or 16-235 (8-bit), black (0%) - reference white (100%)
-7% to 109% total valid range (used in Ramps, High-GS mode, etc.)
Cb,Cr 64-960 (10-bit) or 16-240 (8-bit)
** R,G,B 0-1023 (10-bit) or 0-255 (8-bit), black (0%) - reference white (100%)
3
50 Hz / 60 Hz Selection
Select 50(25) Hz modes by pressing and holding the Format button for about 1 second. When the 50
Hz LED illuminates release the Format button. The 50 Hz / 60 Hz modes will alternate once per
second if the Format button is held longer. The 60 Hz LED is illuminated for 59.94 and 60 Hz formats
(selectable in the OSD menu), as well as 23.98/24 Hz and 29.97/30 Hz formats.
