DGA-6000 ULTRA-HD VIDEO GENERATOR / ANALYZER USER MANUAL
A-8
Sync Commands
Sync
Modes
Command
Legacy
Notes
HD HV
Sync
NegDHDSync
PosDHDSync
Negative Digital HV HD sync
Positive Digital HV HD sync (std mode)
SD HV
Sync
NegDSDSync
PosDSDSync
Negative Digital HV SD sync (std mode)
Positive Digital HV SD sync
HDR Commands
Metadata
Command
Notes
HDR
Metadata
Sets
Electro-Optic
Transfer
Functions
Preset
Primaries
Enter
Primary x,y
values
Luminance
Values
HDROff
HDR10_1
HDR10_2
HDR_SDRG
HDR_HDRG
HDR_2084
HDR_DCIP3
HDR_R2020
HDR_R
HDR_G
HDR_B
HDR_W
HDR_MaxL
HDR_MinL
HDR_MaxCLL
HDR_MaxFALL
Turn off HDR output
Turn on HDR output with MetaData 1 values
Turn on HDR output with MetaData 2 values
The following commands load values into the current (or
if off, previously selected) MetaData [1 or 2], but are not
in effect until HDR10_1 or HDR10_2 is sent again.
Set Traditional Gamma SDR Luminance Range
Set Traditional Gamma HDR Luminance Range
SMPTE ST 2084 EOTF
Copy DCI-P3 colorimetry values to MetaData values
Copy Rec2020 colorimetry values to MetaData values
Set red primary x,y values
Set green primary x,y values
Set blue primary x,y values
Set white x,y values
ex. “HDR_R” (CR), [“OK”], “xxxxyyyy” (CR), [“OK”]
xxxx & yyyy must be 4 digits 3127 = 0.3127
Red primary must have the largest x value, green the
largest y value
Set max_display_mastering_luminance in cd/m2
Set min_display_mastering_luminance in 0.0001 cd/m2
Set Max Content Light Level in cd/m2
Set Max Frame-average Light Level in cd/m2
ex. “HDR_MinL
” (CR), [“OK”], “50” (CR), [“OK”]
maximum values are 65535, except HDR_MinL is 9999
