DGA-6000 ULTRA-HD VIDEO GENERATOR / ANALYZER USER MANUAL
10
Pattern Selection
There are two methods of selecting patterns using the IR remote control – sequential group and pattern
selection, and user-defined pattern lists.
Sequential Group & Pattern Selection
PLUGE, Gray Scale, Gray Field,
Color75, Color100, Special
–
Directly select one of the 6 major pattern groups.
Group
Press the top of the Group rocker key to move forward to the
next pattern Group. Press the bottom of the Group rocker key
to move backward to the previous pattern group.
Pattern
Press the top of the Pattern rocker key to move to the next
pattern in the current pattern group. Press the bottom of the
Pattern rocker key to move to the previous pattern in the
current pattern group.
GEN Gray Scale
– Press this key sequence to select or
alternate between 0%-10% Low-GS (Gray Scale) patterns and
100%-109% High-GS patterns. Press the Gray Scale key only
to return to the default 0%-100% Gray Scale patterns. The
Gray Scale LED will blink slowly when the Low-GS or High-GS
mode is enabled.
Note: The background of the High-GS windows is 100% luma
to examine a display’s ability to differentiate levels near 100%.
Note: 100%-109% patterns are not available for RGB-PC
signals because the maximum signal amplitude for RGB PC
signals is 100% (digital 255 or digital 1023).
User-Defined Pattern List
Up to 10 patterns can be stored in the user-defined pattern list.
The user-defined pattern list is stored in the DGA-6000 and is
discarded if the power is disconnected.
Store -
The currently displayed pattern is stored in the pattern
list.
Delete
- The currently displayed pattern is deleted from the
pattern list.
List >
- The next pattern in the pattern list becomes the current
pattern.
< List -
The previous pattern in the pattern list becomes the
current pattern.
