5. Terminate the short leg of the power cable. Remove the
70 AMP
fuse from the holder. Connect the cable to the
battery. Then, reinstall the
70 AMP
fuse. (Figure 54)
FIGURE 54
1.
With vehicle on flat level ground, set emergency brake & chock rear tires/wheels.
2.
Raise front of vehicle. Support frame rails using jack stands at indicated lift points in OEM service manual.
3.
Remove the front tires/wheels using a 22mm socket.
4.
Park the vehicle on a level concrete or asphalt surface, set the emergency brake & block the rear tires/wheels.
5.
With the exhaust of the vehicle cool, loosen the OEM exhaust clamp that joins the OEM Y-pipe & OEM mid-pipe
using a 13mm socket/wrench. (Figure 55)
FIGURE 55
45
46
AA-4397 Installation Manual
REV 01 | 05/25/2023
FRONT INSTALLATION
FINAL INTERIOR INSTALLATION
