25. Route VU4 harness above EVAP cannister and connect to VU4 and route the ground wires to the stud located above
VU4 from the e-brake bracket that was removed. Do not tighten at this time. (Figure 32)
FIGURE 32
26. Make connection for compressor harness and route the grounds from the harness to the stud above the VU4.
Tighten the ground stud. (Figures 33, 34)
FIGURE 33
FIGURE 34
31
32
AA-4397 Installation Manual
REV 01 | 05/25/2023
WIRING
