12. Separate the upper and lower tank bracket assembly for installation using a 19mm socket/wrench. (Figures 12, 13)
FIGURE 12
UPPER
LOWER
FIGURE 13
13. Using Phillips head screwdriver, loosen but do not remove the bolts on the tank strap to relieve tension on the tank,
allowing tank to be repositioned during installation to allow access to mounting hardware. (Figure 14)
FIGURE 14
14. After loosening straps, slide the tank forward to allow access to mounting holes. (Figures 15, 16)
FIGURE 15
21
22
AA-4397 Installation Manual
REV 01 | 05/25/2023
WIRING
