71
72
AA-4397 Installation Manual
REV 01 | 05/25/2023
15. Will need to trim inner fender liner for clearance of the height sensor arm and rod. Ensure clearance through full
range of motion. (Figure 103)
FIGURE 103
16. Install air spring on OE spring perch with retaining clips facing the front of the vehicle and tighten. (Figure 104)
FIGURE 104
17. Slowly pull the air springs up and install the air spring retaining clips through the top mount once the slot in the
top mount has cleared the top of the frame. (Figures 105)
FIGURE 105
18. Install monotube rear shocks with OEM hardware using a 18mm socket/wrench.
REAR INSTALLATION