73
74
AA-4397 Installation Manual
REV 01 | 05/25/2023
19. Coat with a water-resistant grease & press 1.50 Long Steel Sleeves into upper & lower mounts of the Rear Sway
Bar End Links.
Install lower end link mount with supplied 12mm x 65mm Button Head Bolt with a 7/16” USS Washer from outside
of vehicle inward through sway bar with a 7/16” USS Washer & 12mm Nylon Insert Lock Nut on inside using a
5/16” hex key socket & a 18mm socket/wrench. (Figure 106)
FIGURE 106
Attach upper end link with OEM hardware with large washer to bushing side of end link using a 18mm socket/
wrench. Secure, but do not tighten completely at this time.
20. Install rear tires/wheels using a 22mm socket.
21. Inflate rear air springs.
22. Lower vehicle to ground. Torque 130 ft-lbs.
REAR INSTALLATION
