6. Retain hardware. Remove OEM rear shocks using a 18mm socket/wrench. (Figure 92)
FIGURE 92
7. While checking for appropriate slack in ABS lines, brake lines, differential vent hose & etc, lower rear axle &
remove OEM rear coil springs and isolator bushings. (Figure 93)
FIGURE 93
4. Disconnect OEM rear track bar from the axle using a 21mm socket/wrench. (Figure 90)
FIGURE 90
5. Install supplied brake line relocation bracket with supplied hardware. (Figure 91)
FIGURE 91
NOTE:
Be very careful not to damage OEM rear hard brake lines.
65
66
AA-4397 Installation Manual
REV 01 | 05/25/2023
REAR INSTALLATION
