The JETS key (switch) on the control panel is a 3 position switch :
Low Pump, High Pump, Off. Each time the key is pressed, the next
function is executed. If your primary pump is a single speed pump
then only the high pump will be activated. 2 LED indicators, LO & HI
inform you which speed is on.
Note : if your spa is equipped with a circulating pump it will
be used for filtration and heating instead of the low speed
pump.
Air Blower.
If your spa is equipped with an air blower (bubbler), it is activated by
the AIR key. This is an ON/OFF key. An LED will indicate when the air
blower is on.
Auxiliary Pump(s).
Your spa may be equipped with 1 or 2 more pumps. If you have a
second pump, it could be a single speed or a dual speed.
If you have a third pump then both the second and third pumps must be
single speed. The function of the AUX key changes with the number
and type of auxiliary pumps used. Please consult with the table on the
following page for the proper sequence of activation.
Spa Light
The LITE key can also be a multifunction key. In its simplest
configuration, the LITE key is a simple on / off switch. It turns the spa
light and the accessory, if one is attached, on / off together at the same
time. Alternatively the LITE key may be programmed as a 3 function
key. Pressing it once will turn the spa light on. Pressing it a second time
will turn on the attached accessory, while the light is still on. Press it a
third time and both spa light and accessory will go off.
The table on the following page summarizes all the possible device key
combinations. Please note that your spa may not necessarily have all
these devices attached.
Page 8
