PROGRAMMING SC1000 & SC2000
Parameter Programming
is a means by which the spa owner /
user can change the various timing elements and calibrate
temperature. The process is simple and intuitive. Only 3 keys are used:
UP, DOWN and SET. To program one or more parameters follow the
outlined this procedure:
1.Press SET and DOWN keys together. The first message in the
menu, FP1 will be displayed.
2.Use the UP & DOWN keys to scroll thru the messages in the
menu.
3.Press the SET key to display the current value associated with
the current message.
4.Use UP or DOWN keys to increase or decrease the value.
5.Press SET to lock in the new value and return to the menu.
6.If another item needs programming go to number 2 above.
7.To save changes scroll to message SEND and press SET.
8.To discard changes and restore previous values scroll to
message CANC and press SET.
The menu of parameters is circular. Scrolling is from first to last or
from last to first.
When in programming mode please note that this mode will be
cancelled if there is no key activity for a period of 60 consecutive
seconds. Programming mode is aborted and all changes will be
restored to previous values.
On the following page is an example of how to program a filtration
period. When in programming mode you may program as many
parameters as needed.
Page 12
