The TIME key , which is also the DOWN ARROW key, is also a repeat
key. Think of it as “ - or previous”. Use it to :
♦
Press and hold for 2 seconds then release it to start setting the
real time clock (TOD)
♦
During time setting press TIME to decrease the hours or
minutes value that is being set.
♦
When doing system programming press TIME to scroll to the
previous message
♦
After selecting a message, the system displays the associated
value, press TIME to decrease that value.
The SET key is equivalent to Select or Accept. It functions as an Enter
key of a personal computer, it is the proverbial “hit any key to continue”.
Press the set key to:
♦
After using the spa press the SET key to tell the controller to
take over the management of the spa.
♦
During temperature setting press the SET key to lock in a
new selected temperature.
♦
During time of day programming press the SET key to lock in
the hour and the minutes.
♦
When a message is displayed during parameter
programming, press SET to select that message.
♦
When a parameter value is displayed, press SET to accept
the displayed value and return to message display.
♦
During option programming press SET to toggle a parameter
On or OFF.
♦
When a “HLoH” error message is displayed press the SET
key to clear the error (if the the cause has been corrected).
Pressing the SET key, the user acknowledges that the
cause of the hi limit error has been or will be corrected.
Note: UP is synonymous with TEMP and DOWN is the same
key as TIME. These are used interchangeably and mean the
same thing. Scrolling means pushing either the UP or the
DOWN key to go to the next or previous item or value.
Page 11
