18
INSTALLATION
FLEXIBLE PIPES
SHEET METAL
SCREWS (3 TOTAL)
SEALANT
SEALANT
Secured Vent Pipes to Air Duct
Seated Air Duct
(shown without venting attached for clarity purposes only)
PULL ROD
SECURE WITH
(2) SCREWS
Place and Secure Appliance
1.
Slide the gas fireplace insert into existing fireplace opening until the channels on top of the appliance are aligned with the
air duct.
2. Insert the air duct pull rod handle through access slot at the top of appliance and place pull handle hook through the hole
in pull rod. Simultaneously push the gas insert into existing fireplace and pull the air duct forward until seated.
3. Secure air duct to appliance by using slots at the top of the appliance to secure with two (2) 1/2” (13 mm) sheet metal
screws.
4. Use the pull rod handle to pull the air duct back to starting position. Remove pull handle. Verify vent system connection.
5. If necessary, level the gas insert by threading leveling bolts into nuts at the bottom of the insert (2 each side). Verify appliance
is properly positioned.
