Important safety information
Explanation of symbols
The following symbols are used in this manual and on the
device:
Symbol Signal word Meaning
Warning
Indicates a risk of injury or health
hazards.
Warning
Indicates a risk of injury or health
hazards caused by electrical
voltage.
Important
Indicates possible damage to the
device/accessories.
Note
Indicates important information.
The following labels are used in the text:
Meaning
1. …
2. …
Set of tasks or instructions with a defined s
quence in the text
•
…
•
…
Set of points or warnings without a defined s
quence in the text
Proper use
Only use the device for the purpose which it was d
signed and built for. Any other use is considered ina
propriate.
This device may only be used for the following pu
pose(s):
•
This hybrid digital recorder is used in combination
with connected video signal sources (B/W and colour
cameras, IP cameras) and video output devices (CRT
or TFT monitors) for object surveillance.
Note
Data storage is subject to national data
guidelines.
During installation, inform your customers regar
ing the existence of these guidelines.
Important safety information
Important safety information
The following symbols are used in this manual and on the
Indicates a risk of injury or health
Indicates a risk of injury or health
hazards caused by electrical
Indicates possible damage to the
device/accessories.
Indicates important information.
Set of tasks or instructions with a defined se-
warnings without a defined se-
Only use the device for the purpose which it was de-
signed and built for. Any other use is considered inap-
This device may only be used for the following pur-
ecorder is used in combination
with connected video signal sources (B/W and colour
cameras, IP cameras) and video output devices (CRT
or TFT monitors) for object surveillance.
Data storage is subject to national data-protection
installation, inform your customers regard-
ing the existence of these guidelines.
General information
Before using the device for the first time, read the follo
ing instructions carefully and pay attention to all war
ings, even if you are already familiar with electronic d
vices.
Warning
All guarantee claims become invalid for damages
caused by non-compliance with these operating
instructions.
We cannot be held liable for resulting damages.
Warning
We cannot be held liable in the event of
or personal damage caused by improper oper
tion or non-compliance with the safety information.
All guarantee claims are invalid in such cases.
Keep this manual in a safe place for future reference.
If you pass on or sell the device, you must
this user manual.
This device has been manufactured in accordance with
international safety standards.
Power supply
•
Only operate this device through a power source
which supplies the mains power specified on the type
plate.
•
If you are unsure of the power supply at the install
tion location, contact your power supply company.
Warning
Avoid data loss!
Always use an uninterruptible power supply (UPS)
with overvoltage protection.
•
Disconnect the device from the mains power supply
before carrying out maintenance or installation work.
•
The on/off switch does not completely disconnect the
device from the mains power supply.
•
To disconnect the device completely from the mains
power supply, the plug must be disconnected from
the mains socket. Therefore, the device should be
positioned so that direct and unobstructed access to
the mains socket is guaranteed at all times and the
plug can be disconnected immediately in an eme
gency.
Important safety information
9
Before using the device for the first time, read the follow-
ing instructions carefully and pay attention to all warn-
familiar with electronic de-
All guarantee claims become invalid for damages
compliance with these operating
We cannot be held liable for resulting damages.
We cannot be held liable in the event of material
or personal damage caused by improper opera-
compliance with the safety information.
All guarantee claims are invalid in such cases.
Keep this manual in a safe place for future reference.
If you pass on or sell the device, you must also include
This device has been manufactured in accordance with
international safety standards.
Only operate this device through a power source
which supplies the mains power specified on the type
f the power supply at the installa-
tion location, contact your power supply company.
Always use an uninterruptible power supply (UPS)
with overvoltage protection.
Disconnect the device from the mains power supply
carrying out maintenance or installation work.
The on/off switch does not completely disconnect the
device from the mains power supply.
To disconnect the device completely from the mains
power supply, the plug must be disconnected from
erefore, the device should be
positioned so that direct and unobstructed access to
the mains socket is guaranteed at all times and the
plug can be disconnected immediately in an emer-
