Abus TVVR50011 User Manual Download Page 51

Page: 51 / 66

Network

Parameter

Setting

PPPOE

PPPOE is used on ADSL connections
and when using modems in Germany.
Click on “Set” to enter the access data
(ID and password) for your provider.

DDNS

Server for Dynamic Domain Name Sys-
tem management. Used for updating
host names or DNS entries

NTP

Network Time Protocol
Server for time synchronisation

HOST /
OTHERS

Communication and HTTP port.

Used to specify the e-mail settings
which are sent as an e-mail to a spe-
cific address in the event of an alarm.

Setting up PPPOE manually

Leg en Si e i

1. Check the PPPOE box, enter the user name (Inter-

net access ID) and password, then confirm the
password.

2. Apply the settings by pressing

Setting up DDNS manually

Leg en Si e i

1. To use the ABUS DDNS function, you must first set

up an account under www.eytronserver.com. Please
note the FAQs on the website when doing this.

2. Check the DDNS box, enter “ABUS DDNS” as the

“DDNS Type”, then enter www.eytronserver.com or
“62.153.88.107” under “Server Address”.

3. Apply the settings by pressing

. The IP address of

your Internet connection is now updated on the
server every minute.

Setting up NTP manually

Leg en Si e i

Note

The recorder can synchronise the time with an ex-
ternal server. Several server addresses are avail-
able on the Internet for this purpose.

1. Check the NTP box, then enter the interval at which

the synchronisation should be made again. Enter the
IP address of the NTP server and the NTP port.

2. Apply the settings by pressing

Summary of Contents for TVVR50011



































































Search results

Summary of Contents for TVVR50011

Reviews:

Related manuals for TVVR50011

Brands by name

Popular brands

Abus TVVR50011, User Manual

Search results

Summary of Contents for TVVR50011

Reviews:

Related manuals for TVVR50011

Brands by name

Popular brands