Abus TVVR50011, User Manual

Page: 19 / 66

HDD Management
1. Click on “Enter”.
2. To set up a new HDD, check the box and then click
on Init .
Warning
All data on the drive is deleted!
3. Confirm the prompt by pressing OK . The HDD is
then set up for operation. The progress is displayed
on the status bar.
4. Exit the setting by pressing OK , then click on
Record Settings
1. Click on “Enter”.
2. Select the camera in the “General” tab and specify
the settings.
3. Click on the “Schedule” tab and then on
4. Check the “Enable Schedule” box and
cording is then switched on for the entir
5. Exit the setting by pressing
OK
. The settings are
displayed in colour in the schedule overview.
the box and then click
. The HDD is
progress is displayed
, then click on Next .
the “General” tab and specify
Click on the “Schedule” tab and then on Edit .
the “Enable Schedule” box and All Day . Re-
cording is then switched on for the entire day.
. The settings are
displayed in colour in the schedule overview.
6. To transfer this schedule to other cameras, first s
lect the camera (or “All” if all cameras should have
the same settings) and confirm by pressing
7. Exit the setting by pressing
Network Settings
1. Click on “Enter”.
Note
To check whether DHCP can be selected (or if
you have to set the IP address and other settings
manually), consult your network administrator.
2. DHCP activated: If DHCP is set up in the network
router, then check the DHCP box. All network se
tings are then made automatically.
3. DHCP not activated: Enter the data manually (IP
address, subnet mask and default gateway = IP a
dress of the router).
A typical address specification is as follows:
•
IP address:
•
Subnet mask:
•
Default gateway:
•
Preferred DNS server:
4. Exit the setting by pressing
Setup wizard
19
To transfer this schedule to other cameras, first se-
lect the camera (or “All” if all cameras should have
the same settings) and confirm by pressing
Copy .
Exit the setting by pressing OK , then click on Next .
To check whether DHCP can be selected (or if
you have to set the IP address and other settings
manually), consult your network administrator.
If DHCP is set up in the network
the DHCP box. All network set-
tings are then made automatically.
Enter the data manually (IP
address, subnet mask and default gateway = IP ad-
A typical address specification is as follows:
192.168.0.50
255.255.255.0
192.168.0.1
Preferred DNS server: 192.168.0.1
Exit the setting by pressing OK , then click on Next .