Device menu
38
Warning:
If only one HDD is installed and this is set to
“Read-only”, then the device cannot make r
cordings.
Redundancy:
At least two HDDs are installed.
The redundant HDD makes an extra copy of the
recordings. This is used as a data backup.
•
R/W
At least one HDD must have the R/W status
(Read/Write). Otherwise, no recordings are possible.
Adding a network HDD
Note
Pay attention to the network information on page
49.
Parameter
Setting
NetHDD No.
1–8
Type
NFS
NetHDD IP
IP address
NetHDD Directory
Directory name
Enter the parameters to add a network HDD.
Note
The network must be active to record on the ne
work HDD.
For example, check whether a night service or
similar is installed which switches off network a
tivity.
If only one HDD is installed and this is set to
only”, then the device cannot make re-
The redundant HDD makes an extra copy of the
recordings. This is used as a data backup.
one HDD must have the R/W status
(Read/Write). Otherwise, no recordings are possible.
Pay attention to the network information on page
IP address
Directory name
Enter the parameters to add a network HDD.
record on the net-
For example, check whether a night service or
similar is installed which switches off network ac-
Checking the HDD status
The status of each HDD can be checked in the “Maint
nance” menu. S.M.A.R.T. information (Self
Analysis and Reporting Technology) is stored in the log
data.
•
Call up the log file and search according to the info
mation/S.M.A.R.T. HDD (see page
Setting up the HDD alarm
You can specify alarms to inform you of HDD errors.
•
To do this, call up “Exception” in the “System Se
tings” menu (see page 44).
status
The status of each HDD can be checked in the “Mainte-
S.M.A.R.T. information (Self-Monitoring,
Analysis and Reporting Technology) is stored in the log
Call up the log file and search according to the infor-
mation/S.M.A.R.T. HDD (see page 47).
alarm
You can specify alarms to inform you of HDD errors.
To do this, call up “Exception” in the “System Set-
).
