8
Installation, Operating and Maintenance Instructions (Original Instructions)
ABS submersible sewage pump XFP 80C - 201G
6
Mounting and Installation
The regulations covering the use of pumps in sewage applications, together with all regulations
involving the use of explosion-proof motors, should be observed.The cable ducting to the control panel
should be sealed off in a gas-tight manner by the use of a foaming material after the cable and control
circuits have been pulled through. In particular the safety regulations covering work in enclosed areas
in sewage plants should be observed together with general good technical practice.
For the XFP transportable version, arrange the cable run so that the cables will not be kinked or nipped.
Connect the discharge pipe and cable (see section ”Electrical Connection”). Place the pump on a fi rm surface
which will prevent it from overturning or burrowing down. The pump can also be bolted down to the base or
suspended slightly by the lifting handle. Hoses, pipes and valves must be sized to suit the pump performance.
6.1 Installation
examples
6.1.1 Submerged in concrete sump
1
Sump cover
2
Venting line
3
Sump cover
4
Sleeve for cable ducting to
the control panel as well as
for aeration and venting
5
Chain
6
Infl ow line
7
Ball-type fl oat switch
8
Submersible pump
9
Concrete sump
10
Pedestal
11
Guide rail
12
Discharge line
13
Non-return valve
14
Gate valve
15
Power cable to motor
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
