������������ ���� ���������� ������������ 15
ABS lifting station Sanimat
6.
G������ m���������� h����
ABS lifting stations are reliable quality products each being subjected to careful final inspection. Lubricated-for-
life ball bearings together with monitoring devices ensure optimum pump reliability provided that the pump has
been connected and operated in accordance with the operating instructions.
Should, nevertheless, a malfunction occur, do not improvise but ask your ABS customer service department for
assistance.
This applies particularly if the unit is continually switched off by the current overload in the control panel, by the
thermal sensors of the thermo-control system or by the seal monitoring system (DI).
Regular inspection and care is recommended to ensure a long service life.
NOTE
The ABS service organisation would be pleased to advise you on any applications
you may have and to assist you in solving your pumping problems.
NOTE
The ABS warranty conditions are only valid provided that any repair work has been
carried out in ABS approved workshop and where original ABS spare parts have
been used.
6.3
Oil filling and Oil changing
Waste oil must be disposed of in the proper manner.
6.4
C�������� �f ��v�� ������� ����
It is recommended that the level control pipe be examined monthly to ensure that no build up of solids occurs
inside the pipe, thus preventing accurate level control of the lifting station. Build-up of solids inside the pipe can
cause continuos pumping, no pumping or inaccurate switching levels. The pipe can be pulled out of the tank
and cleaned, rinsed and replaced. It should be greased as it is put back in.