![background image](http://html1.mh-extra.com/html/abs/alliance-e-series/alliance-e-series_user-manual_3491117046.webp)
Alliance Intelligent Battery Series
TM
User’s Guide
© 2020 American Battery Solutions Inc. All rights reserved. The data herein is intended as a guide and does not reflect the specification range for any particular property of this
product. Such data is based upon analysis of representative samples and not the actual product shipped. We based the information on data believed to be reliable on the date
compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described.
Page 46
Table 13: Alliance Intelligent Battery Series™
messages and signals on the CAN interface
SIGNAL NAME
MESSAGE
MESSAGE
ID
UNIT
COMMENT
BATT_USERMODE
BATT_userInputs
0x100
0 - Request to be reduced Range...
BATT_USERSOC
BATT_userDisplay
0x101
%
State of Charge for the battery pack
BATT_PACKFULLCAPACITY_AH
BATT_packStatus
0x103
Ah
Estimated full charge capacity
BATT_PACKNUMMODSCONFIGURED
BATT_packStatus
0x103
Number of parallel modules configured for the pack
BATT_PACKNUMMODSONHVBUS
BATT_packStatus
0x103
Number of modules on the HV bus
BATT_PACKNUMMODSONNETWORK
BATT_packStatus
0x103
Number of modules on the network
BATT_PACKREMAININGCAP_AH
BATT_packStatus
0x103
Ah
Remaining charge
BATT_PACKSOC
BATT_packStatus
0x103
%
State of Charge for the battery pack
BATT_PACKSTATE
BATT_packStatus
0x103
Reports the current state of the battery
CHRG_CHARGERENABLED
CHRG_chargingControl
0x111
0 - Charger is disabled...
CHRG_CHARGINGCURRENT
CHRG_chargingControl
0x111
A
Output current from charger
CHRG_CHARGINGVOLTAGE
CHRG_chargingControl
0x111
V
Output voltage from charger
BATT_IPACKCHGLIMITCONT
BATT_packChgContLimits
0x112
A
Current recharge limit in A
BATT_IPACKDCHLIMITCONT
BATT_packDchContLimits
0x113
A
Current discharge limit in A
INV_CURRENT
INV_power
0x115
A
Current measured by motor
INV_VOLTAGE
INV_power
0x115
V
Voltage measured by motor
BATT_IPACK
BATT_packHvStatus
0x124
Pack current - combined current of all modules
BATT_VPACK
BATT_packHvStatus
0x124
V
Voltage of the pack
BATT_VPACKLOAD
BATT_packHvStatus
0x124
V
Voltage measured across load
BATT_TPACKMODULEMAX
BATT_packMinMax
0x125
deg C Maximum Battery temperature
BATT_TPACKMODULEMAXID
BATT_packMinMax
0x125
ID of maximum Battery temperature
BATT_TPACKMODULEMIN
BATT_packMinMax
0x125
deg C Minimum Battery temperature
BATT_TPACKMODULEMINID
BATT_packMinMax
0x125
ID of minimum Battery temperature
BATT_VPACKBRICKMAX
BATT_packMinMax
0x125
V
Maximum brick voltage
BATT_VPACKBRICKMIN
BATT_packMinMax
0x125
V
Minimum brick voltage
BATT_VPACKMODULEMAXID
BATT_packMinMax
0x125
ID of maximum brick voltage
BATT_VPACKMODULEMINID
BATT_packMinMax
0x125
ID of minimum brick voltage
HOST_DBGRESETEEP
HOST_batteryRequest
0x502
Debug reset EEPROM (1 = reset)
HOST_STATEREQUEST
HOST_batteryRequest
0x502
State to be requested from battery by host