Alliance Intelligent Battery Series
TM
User’s Guide
© 2020 American Battery Solutions Inc. All rights reserved. The data herein is intended as a guide and does not reflect the specification range for any particular property of this
product. Such data is based upon analysis of representative samples and not the actual product shipped. We based the information on data believed to be reliable on the date
compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described.
Page 22
Series and Parallel Battery Configuration Warning and
Notices
Connecting Alliance Intelligent Battery Series
TM
Communication Cables
The Alliance Intelligent Battery Series™ intelligent battery has a special 10-pin
communication connector. American Battery Solutions can provide harnesses for
connecting modules to industry standard D-sub 9 connectors or open wires for
connecting to system or vehicle wire harnesses for industry standard CAN bus
communications as shown in Figure 3. Only one of the two bus interfaces is enabled
depending on the ordered configuration. The connectors mate together (one male,
one female) so that one battery’s bus output cable can be connected to the next
battery’s bus input cable in any order.
