| Important information –
User information
6
Electrical installation and testing must be carried out with reference to local rules by a qualified specialist
electrical contractor, who, on the basis of their specialist training and experience, as well as their knowledge of
the relevant standards, is able to assess and carry out the working steps described in this manual and recognise
potential hazards.
WARNING!
Notification or approval requirement for charging stations
Please note that electrical grid operators, energy suppliers or national regulations may require notification of or
approval for the installation or operation of a charging station.
A Duty to Notify applies in Germany according to §19 NAV.
In case of installation faults, or malfunctions that can be traced back to faulty installation, always contact the
contractor who carried out the installation first.
The product must not be covered with other objects or materials.
No liquids or receptacles containing liquids must be placed on the product.
Please note that the POLEMH6 mounting pole must never be installed directly on asphalt! To ensure safe and
proper mechanical installation, the optionally available EMH9996 concrete foundation or a functionally equivalent
alternative must always be provided.
Do not under any circumstances make alterations to the product. Any disregard of this instruction represents a
safety risk, fundamentally breaches the guarantee provisions and may void the warranty with immediate effect.
Malfunctions affecting the safety of persons, connected electric devices or the device itself must be resolved by a
qualified specialist electrical contractor.
Should one of the following malfunctions occur, please contact the specialist electrical contractor who has carried
out the installation of your wallbox and accessories:
y
The product housing has been damaged mechanically, or the housing cover has been removed or can no longer
be closed.
y
Sufficient protection of the small distribution board against splashing water and/or foreign objects is no longer
provided.
y
The product does not function properly or has been otherwise damaged.
WARNING!
Observation of further safety instructions
Please always observe all further safety instructions in the manuals for the optionally available eMH3 Wallbox
and other accessories for the POLEMH6.
User information
Ensure that rated voltage and rated current of the supply cable at the installation location comply with the param-
eters of your local electricity grid and that the rated output of the wallbox(es) installed on the POLEMH6 is not
exceeded during operation.
Local safety regulations regarding the operation of electrical devices for the country in which you operate the
wallbox(es) installed on the POLEMH6 always apply.
Never install or operate the POLEMH6 in confined spaces. In particular, it must be ensured that vehicles can be
parked at a suitable distance from the POLEMH6 for charging and can be connected to the charging cable without
tension.
Make sure that the POLEMH6 is always closed and locked when in use. All authorised users must be aware of the
'unlock' position of the key.
No user-maintainable parts are located inside the device.
Only have the POLEMH6 repaired by a qualified specialist electrical company.