| Installation –
Installing the eMH3 Wallbox on the POLEMH6
22
8
Run the data cables through the small cable outlets
of the mounting pole and into the housing of the
wallbox.
9
Connect the data cables to the Modbus interfaces
on the inside of the wallbox housing cover.
10
Replace the electronic components cover onto the
wallbox housing and fix it into place with the screw
you removed in
Step 3
.
WARNING!
Proper routing of the data cables
Run the data cables through the two openings at the bottom edge of the electronic components cover.
Make sure the data cables are not squeezed through the electronic components cover or under tension when
the housing cover is opened or closed.
11
Flip the housing cover up so that it clicks into the
housing and lock it with the triangular key.