
| Installation –
Laying the EMH9996 foundation
14
WARNING!
Using a custom foundation
As an alternative to the EMH9996 concrete foundation, which is available as an accessory, you can also create
your own foundation and use it for installing the POLEMH6.
The calculation, design and manufacture of the self-made concrete foundation are the sole responsibility of
the operator or the company carrying out the installation on behalf of the operator.
In addition, you will need the following tools:
Torque spanner with Allen key,
6 mm
Spirit level
Phillips screwdriver
Slotted screwdriver
Torx screwdriver
Hexagon screwdriver
Tape measure
Bricklaying tools
Concrete screed (mixed)
Vacuum lifting tool (optional)
Laying the EMH9996 foundation
The optional EMH9996 concrete foundation from ABL provides a level installation surface for the POLEMH6 mounting
pole and ensures the necessary stability and support via factory-inserted screw anchors.
Please note: these installation instructions only describe how to install the POLEMH6 on the EMH9996 concrete foun-
dation, which is available as an accessory.
DANGER!
Dangerous electrical currents
Always observe the 5 safety rules:
1
Cut power source
2
Secure all cut-off devices
3
Verify absence of voltage
4
Ground and short-circuit
5
Cover or bar access to adjacent components under voltage
The supply cable must not be reconnected to the electricity grid until
Step 4
in the section “Electrical connection