F-2
Appendix F
otherwise it will cause system conflict when you install the second bus master
driver!
2. This Windows
®
95/98 driver does not support CD-ROM Changers. If you
have an ATAPI CD-ROM Changer installed in your system, please do not
install this driver!
3. We have found that the Windows
®
95 OSR2/Windows
®
98 version would fail
to load the driver on some systems using the Bus Master chipset after you
install and restart the system. The following step could solve this problem if it
happens:
(1) Go to My Computer and double click Control Panel.
(2) Double click System then go to Device Manger and View Devices by
Type.
(3) Go to hard disk controllers.
(4) Double click PCI Bus Master IDE Controller (Ultra DMA supported).
(There should be a yellow mark besides this item)
(5) Click Resources and you should see a box near the bottom of the screen
that says “Set Configuration Manually”.
(6) Click on “Set Configuration Manually” and you will see a check next to
“Use automatic setting”.
(7) Uncheck the box and when the system asks you to reboot click “yes”.
(8) After the system restarts the yellow mark should be gone
4. De-Installation:
To uninstall XStore Pro from your system, run "Uninstall" from the HighPoint
XStore Pro program group. This uninstall utility will: deactivate CD Xpress,
if CD Xpress is active, remove the buffer space, and uninstall XStore Pro and
CD Xpress from the system. After the uninstallation of XStore Pro,the hard
disk will return to its original status. We suggest users to reboot the system
after finishing uninstallation.
5. The ATAPI LS-120 deivce will be recognized as a removable device in retail
Windows 95(4.00.95) and OSR1 Windows 95(4.00.95 A) after XStore Pro
driver is installed.
6. This driver might lock on certain motherboards. Please check HighPoint
Technology first if you encounter problems.
For more detailed information, please check the readme file stored in the
XStore
Pro Program Group
. If you want to upgrade to a new version of driver or want to
know more about XStore Pro products, please go to the HighPoint Technologies
Inc’s company WEB site, the URL is
http://www.highpoint-tech.com/
.
Summary of Contents for BX6
