Abicor Binzel ABICAR 1200 PRO, Operating Instruction

Page: 50 / 64

EN - 20
6 Putting into operation ABICAR 1200 PRO
3
Roughly align the welding torch (G) with the stop levers (D) .
4
Use the cross slide (E) for fine adjustment.
6.7 Adjusting the cross slide
The cross slide must be adjusted according to the welding torch type and diameter. The welding torch
position can be changed in the vertical and horizontal direction during welding using the cross slide.
► Turn the adjusting screws (A) and (C) of the cross slide to the left or right.
The brackets
(B)
and
(D)
can be adjusted sidewise, or downwards and upwards.
6.8 Connecting the oscillator
6.8.1 Mounting the oscillator
In order to mount the oscillator, the torch mount, incl. the fastening plate, must first be disassembled.
Fig. 14 Adjusting the cross slide
A
Adjusting screw, vertical
B Bracket, horizontal
C
Adjusting screw, horizontal
D Bracket, vertical
A
D
C
B
Fig. 15
Disassembling the torch mount