ABICAR 1200 PRO
5 Transport and positioning
EN
-
11
5 Transport and positioning
► Convey the device to the desired work area using its handle.
► Ensure clear access to the control elements and connections.
► To ensure a clean weld seam, ensure that the surface is clean and flat.
6 Putting into operation
Noise level
<70 dB
Weight
14 kg
Tab. 2
General information about the oscillator
Oscillation type
Angle (max. 11°)
Oscillation width, where r = 150 mm
1–30 mm (1–100%)
Oscillation speed
(where there is a 10 mm oscillation width and
the stop time on the oscillation ends = 0 s)
7–164 cycles/min (1–100%)
Stop time on the oscillation ends
0–5 s
Max. torque
5 Nm
Power
12 W
Weight
2.6 kg
Tab. 3
Ambient conditions, transport, storage and operation
Ambient temperature
(operation, storage in a closed environment)
−10°C to +40°C
Ambient temperature for transport
−25°C to +55°C
Relative humidity
Up to 90% at 20°C
Tab. 1
General information
WARNUNG
Risk of injury resulting from improper transportation and positioning
In the event of improper transportation and positioning, the device could topple over or fall. This could
cause major burns.
► Check and wear your personal protective equipment.
► Place the device on a suitable surface (flat, solid, dry) on which it will not topple over.
► Note the weight of the device when lifting it.
4.3 Technical data auf Seite EN
► Avoid lifting and setting down the device abruptly.
► Do not lift the device over persons or other devices.
HINWEIS
Material damage resulting from improper transportation and positioning
Weather conditions can cause irreparable damage to the device.
► Protect the device against the weather conditions, e.g. rain and direct sunlight.
WARNUNG
Electric shock caused by incorrectly installed and damaged cables
Use of damaged or improperly installed cables may result in a potentially fatal electric shock.
► Check all live cables and connections for proper installation and damage.
► Have any damaged, deformed or worn parts replaced only by a qualified electrician.
