ABICAR 1200 PRO
1 Identification
EN
-
3
1 Identification
The welding tractor ABICAR 1200 PRO is used to produce continuous butt and fillet welds. It is attached
with permanent magnets and can be used with MIG/MAG welding torches. The device must only be
operated using original ABICOR BINZEL spare parts. These operating instructions only describe the welding
tractor ABICAR 1200 PRO.
When used in these operating instructions, the terms “device”, “product” and “welding tractor” always refer
to the welding tractor ABICAR 1200 PRO.
In connection with the accessories, the following use is enabled:
— Welding with oscillation
— Use a larger-diameter welding torch
— Welding with two welding torches simultaneously
— Movement of the equipment along external edges, lap joints, low walls, walls with holes, ceilings,
tubes and tanks
1.1 Marking
This product fulfils the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
1.2 EU declaration of conformity
(EN) EC Declaration of Conformity
Translation of the German declaration of conformity
Manufacturer
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Alten-Buseck
Germany
Authorized person for the
technical documentation
Hubert Metzger
Address – see address of manufacturer
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product
Description
The ABICAR 1200 PRO welding tractor assists in the creation of
continuous blunt seams and fillet weld. It is attached with permanent
magnets and can be used with the MIG/MAG welding torch.
Designation
Welding tractor
Function
Welding torch driving carriage for
mechanized welding
Trade name
ABICAR
Type
1200 PRO (100-240 V)
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the harmonization legislation of the European Union listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Source of information
Relevant Union harmonisation
legislation
2006/42/EC Machinery
(Filing L96 from 29.03.2014)
2014/30/EU EMC
(Filing L96 from 29.03.2014)
2011/65/EU RoHS
(Filing L174 from 01.07.2011)
Harmonized standards used
EN ISO 12100:2010
EN 60204-1:2018
EN IEC 60974-10:2014+A1:2015
EN
IEC 63000:2018
Harmonized national standards
and technical specifications
Alten-Buseck, 25.06.2021
Signature
Prof. Dr.-Ing. Emil Schubert,
Managing Director
Archiving: Document
no.:
03-05-2021
06-May-2021
