![background image](http://html1.mh-extra.com/html/abbott/plex-id-sp/plex-id-sp_user-manual_450981059.webp)
Routine Operation
How to start
Abbott Laboratories
PLEX-ID SP User Manual 10/2009 N09455
57
Figure 4–42.
Shield plate in function
6.
Close the sliding door. The see-through lid (if in place) protects the
instrument against environmental contamination. However, if
processing potentially biohazardous materials, the see-through lid
must be in place, and the sliding door must be closed.
Note
The sliding door can be left open or the see-through lid can be
absent if desired. This action does not break the run.
▲
7.
After the run, remove the plate(s) according to the protocol request.
Confirm each plate removal by pressing the
START
button. Note
that the plate containing your samples is removed first.
8.
Press the
STOP
button after completing the run.
For startup, refer to “Switching on” on page 39.
Figure 4–43.
Plates
The PLEX-ID SP is compatible with 24 Deep Well plates and 96 Deep
Well plates (Figure 4–43 and Table 4–4). Specially designed magnetic
rods (magnet heads) and tip combs that protect the magnets during the
process are available for different plate types and applications.
Shield plate
Summary of Contents for PLEX-ID SP
