Abbott Laboratories
PLEX-ID SP User Manual 10/2009 N09455
77
Chapter 8
Troubleshooting Guide
Note
Do not use the instrument if it appears that it does not function
properly.
▲
Note that the instrument does not verify the logic flow of the received
commands.
When an error is detected, the current operation is terminated. After an
error, it is best to abort the current run and restart from the beginning
after the problem is fixed. The internal software has the following error
messages and warnings (Table 8–8).
Table 8–8.
Error messages reported
Code
Error message
Description
0 No
error
–
1
The command was not recognized as
a valid command
The command was not recognized as a valid command.
2
The tip comb holder lifting
mechanism is out of position
The magnet head position is in error.
3
The turntable rotating mechanism is
out of position
The turntable position is in error.
4
The magnetic head holder lifting
mechanism is out of position
The magnetic tips lift position is in error.
5
The heating block lifting mechanism
is out of position
The heater lift position is in error.
6
The shield plate turning mechanism is
out of position
The shield plate position is in error.
7
Serial number already set
Attempt to set the serial number when it is already set.
8
Invalid command parameter
Invalid command argument.
9
Permanent parameters lost
Nonvolatile parameters lost.
10
Protocol name already used in other
directory
Cannot record a protocol with the same name to another directory.
11
Internal software error
Internal software error. This error is actually never reported because
the firmware halts on detection of an internal error. However, this
error may show up in the error log.
12
The requested movement is not
Cannot perform the requested movement. For example, the head and
Error messages
and warnings
Continued
Summary of Contents for PLEX-ID SP
