Installation
How to pack the instrument for transportation
Abbott Laboratories
PLEX-ID SP User Manual 10/2009 N09455
37
Figure 3–26.
Refitting the transport lock of the heating block (B)
To refit the transport lock of the tip comb holder, follow these steps:
1.
The transport lock of the tip comb holder is refitted according to
Figure 3–27 through Figure 3–29. Press the transport lock from
both sides and insert the two eccentric pins back into place into
their respective holes (Figure 3–27).
Caution
Ensure that the power is switched off.
▲
Figure 3–27.
Fitting the transport lock of the tip comb holder (A)
2.
Press the tip comb holder transport lock ends together with both
hands and insert all the way down to lock position (Figure 3–28).
Note that the turntable can move slightly although the transport
lock is fitted.
How to refit the
transport lock of the
tip comb holder
Summary of Contents for PLEX-ID SP
